Quadro4Li Manual II: Administrator's Guide
Administrator’s Menus
Quadro4Li; (SW Version 5.3.x)
48
8.
Licensing
This page is only available if the corresponding licensing is
enabled from the
page.
This group allows you to configure the extension to be used by
the Quadro Communication Manager (QCM) soft-phone
application, iQall
and the Pro/Basic level Desktop
Communication Console.
The
Enable QCM (Quadro Communication Manager) license
checkbox allows you to set the corresponding extension to be
used by the QCM application. When the checkbox is not
selected on this page, the QCM will be functional with the
extension only during trial period.
Enable DCC Pro license
checkbox enables Quadro PBX
extensions to use the Pro-level Desktop Communication
Console (the application description can be found at
Enable DCC Basic license
checkbox enables Quadro PBX
extensions to use the Basic-level Desktop Communication
Console (the application description can be found at
Please Note:
These checkboxes can be simultaneously
selected on as many extensions as QCM and/or DCC licenses
are available on the Quadro.
Fig. II-86: Extensions Management - Edit Entry – License Settings page
Enable iQall Toggling license
checkbox allows you to allocate the iQall Toggling licenses to the corresponding extensions.
The
Go to User Settings
link is used
to
make a quick jump to the extension specific Extension's Main Menu page (see Manual III – Extension User’s
Guide).
The
Go to Line Settings
link is used to make a quick jump to the
page of the corresponding extension.
The
Go to Codec Settings
link is used to make a quick jump to the
Codec Settings
page of the corresponding extension.
Pickup Group Extension Settings
Pickup Group & Access List
The
Pickup Group
service is used to monitor calls addressed to a certain list of extensions and to pick up calls ringing on the listed extensions. This
service may be used when a group of extensions are located in the same area so the persons nearby can hear the ringing on one of the extensions.
This feature allows you to pick up the call ringing on a certain extension by dialing the number of the pickup extension.
The
Pickup Group
list is used to define the extensions that can be monitored by calling a certain pickup extension.
The
Access List
is used to define PBX, SIP or PSTN users that are allowed or forbidden to intercept calls ringing on extensions in the Pickup
Group.
If a user dials the pickup extension when several extensions of the pickup group are ringing, the first (oldest in time) call will be picked up. When the
user dials the pickup extension and no extensions of the pickup group are ringing, the “No call is available to pickup” message will be played to the
user. When the user that is not listed in the
Access List
dials the pickup extension, password authorization (of the pickup extension) will be required
to answer the call. When a denied user dials the pickup extension, the “Party does not accept your call” message will be played to the user.
For
Pickup Group
extensions, the
Extensions Management
-
Edit Entry
page consists of
General Settings,
SIP Settings
and
Advanced SIP
Settings
pages. The
SIP Settings
and
Advanced SIP Settings
pages are the same as for regular extensions (see
described above. The
General Settings
page has a different content as follows:
