Epygi QUADRO FXO Administrator'S Manual Download Page 74

Page: 74 / 77

Quadro Manual II: Administrator's Guide

Appendix: System Default Values

QuadroFXO (SW Version 3.0.x)

Appendix: System Default Values

Administrator Settings

Issue

System Default Value

Comments

Admin Settings

Quadro Hostname

quadro

LAN IP Address

172.30.0.1

Subnet Mask - 255.255.0.0

DHCP Server

Enabled

IP Range - 172.30.0.100-172.30.0.254
WINS - 0.0.0.0

Regional Settings

Locale - US
TimerZone - US/Central
Language - English
Theme - Dynamo

Time/Date Settings

NTP Server and Client - Enabled
Predefined NTP Server - npi1.epygi.com

Polling interval - 6

WAN Interface Protocol

Ethernet

WAN Interface Bandwidth

Upstream – 10000
Downstream – 10000
Min Data Rate – 0

WAN IP

Automatically through DHCP

Mac Address

Assigned by device

MTU - 1500 Bytes

DNS Server

Dynamically

Mail Settings

Disabled

Firewall

Enabled, Medium level

Ping Stealth - enabled
Fool Portscanner - disabled

NAT Enabled

Filtering Rules

Outgoing Traffic - MS File Sharing

(Blocked for all)

SIP Access (Allowed for all)

No user defined services and IP pool groups

Event Settings

Display notification for all

Call Statistics

Enabled

100 entries for all type of calls

SIP Settings

UDP and TCP Port – 5060
Session Timer – disabled

DNS Server for SIP – default
SIP timers – RFC 3261

RTP Settings

RTP/RTCP port range for FXS lines - 6000-6049
G276 Standard - ITU-T specification
Telephone Event Draft Support - enabled
RTCP Support - disabled

Properties for all Codecs except G723 and iLBC :

Packetization -20ms
Silence Suppression -yes

G723 and iLBC properties:

Packetization - 30ms
Silence Suppression - yes

NAT Traversal Settings

NAT Traversal for SIP – enabled
SIP and RTP Parameters - Use STUN
SIP TCP Port - 5060

STUN Parameters:
STUN Server - stun.epygi.com
Port - 3478
Polling Interval: 1 hour
Keep-alive interval: 120 seconds
No entries in NAT Exclusion table

FXO Settings

All FXO lines enabled, incoming and outgoing calls allowed
and routed to 00 Attendant

Gain Control Settings

FXO lines:
Transmit Gain: 0
Receive Gain: 6

Call Routing

Route all incoming SIP calls to Call Routing - disabled
Local Routing table – no entries

Local AAA Table - no entries

RADIUS Settings

RADIUS client - disabled.

Dial Timeouts

4 seconds

Summary of Contents for QUADRO FXO














































































Search results

Summary of Contents for QUADRO FXO

Reviews:

Related manuals for QUADRO FXO

Brands by name

Popular brands

Epygi QUADRO FXO, Administrator'S Manual

Search results

Summary of Contents for QUADRO FXO

Reviews:

Related manuals for QUADRO FXO

Brands by name

Popular brands