QuadroFXO Manual II: Administrator's Guide
Administrator's Menus
QuadroFXO (SW Version 3.0.x)
26
Users Menu
Fig. II-39: Telephone Users Menu in Dynamo Theme
F Fig. II-40: Telephone Users Menu in Plain Theme
User Management
The
User Management
is used to create user extensions and auto attendants on the Quadro. From this page, by clicking on the user extension,
administrator can get the extension settings pages.
Two types of user extensions can be created on the Quadro:
active
and
inactive
extensions. Active extensions are those that are attached to a line,
can place and receive calls and use available telephony services. Inactive extensions are those that are not attached to the line, they can use some
available telephony services but cannot place and receive calls; instead, they have a voice mailbox available to keep the brief messages from the
callers.
Quadro4x has four available lines and up to four active extensions can be established. Quadro16x has sixteen available lines and up to sixteen
active extensions can be established.
Attendant extensions are dedicated to the IVR system on the Quadro, which is used by the callers to reach Quadro’s users, use remote access and
call relay services. It is possible to create Auto Attendants with the custom scenarios. By default, Quadro has one Auto Attendant extension (00)
which is undeletable.
The
Extensions
table is a list of all extensions and their parameters.
Fig. II-41: Users Management page
The following columns are present in the table:
•
Extension
- lists the 2-digit user or attendant extensions on the Quadro. This number is used for internal PBX calls.
•
Display Name
- indicates an optional display name to identify the caller.
