Quadro Manual I: Installation Guide
Requirements
Quadro2x, 2xi, Quadro4x, 4xi, 4xa, 4xia, 4xs, 4xis, Quadro16x, 16xi, 16xa, 16xia, 16xs, 16xis; (SW Version 3.0.x)
7
Requirements
•
One 120/240 VAC power outlet in close proximity to the Quadro.
•
One RJ45 Ethernet 10/100 broadband Internet connection, an ADSL Internet connec-
tion or a G.SHDSL Internet connection.
•
At least one RJ11 telephone connection is recommended to connect the Quadro to
the PSTN network (all Quadro IP PBXs with FXO ports). For ISDN Quadros an RJ45
CAT 5 cable is needed to connect Quadro to ISDN.
•
At least one off-the-shelf analog phone with an RJ11 telephone cable.
•
One CAT 5 Ethernet cable with an RJ45 connector to connect to the Quadro LAN port.
•
One PC with a 10/100 Mbps Ethernet card or adapter installed.
•
TCP/IP network protocol installed on each PC.
•
For optimal results, Internet Explorer 5.5 or higher, or Netscape Navigator 4.7 or
higher are recommended.
Please Note:
All Quadro IP PBXs are shipped with one RJ11 cable and one straight RJ45
CAT 5 cable. If the LAN connector of the Quadro connects to a hub or switch, a crossover
cable may be required.
Other cables are added according to the different connectivity requirements of the Quadro
IP PBX types.
Summary of Contents for Quadro 16xa
Page 1: ......
