Quadro Manual I: Installation Guide
Step 2.3: Comprehensive Configuration
Quadro2x, 2xi, Quadro4x, 4xi, 4xa, 4xia, 4xs, 4xis, Quadro16x, 16xi, 16xa, 16xia, 16xs, 16xis; (SW Version 3.0.x)
34
DNS Settings
For DNS, the selection is set to
Dynamically by Provider
. When using a static IP address,
fixed values must be entered.
Fig. I-38: DNS Settings page
The Quadro will suggest the correct settings. If
Dynamically by Provider
is selected, the
DNS server settings will be set automatically whenever a connection to the Internet is es-
tablished.
If
Fixed Nameserver Address
is selected, manually enter the IP addresses provided by
your ISP for the name server and the alternative name server.
If
Ethernet
is the selected WAN Interface protocol, clicking
Next
shows the summary
page
of the Internet Configuration Wizard
.
If
PPPoE
is the selected WAN Interface protocol, the next page will be
ISP Authentication
Settings.
ISP Authentication Settings
Fig. I-39: ISP Authentication Settings page
This is applicable only if PPPoE is your
WAN Interface
protocol. Enter the authentication
parameters provided by your Internet Service Provider (ISP).
Please Note:
Typically, the User name is your email account, and the password is a string
of alphanumeric characters.
Summary of Contents for Quadro 16xa
Page 1: ......
