QX50/QX200/QX2000; (SW Version 6.0.x)
43
QX50/QX200/QX2000 Manual III: Extension User’s Guide
The
Intercom
page contains the following components:
The
Intercom
drop-down list has three available sections:
•
Allow Activation on Request
- this selection enables the
Intercom service for calls that are made through a call
routing rule of the
PBX-Intercom
call type. Please contact
your system administrator to ensure a corresponding rule
is available for your extension.
•
Activate Always
- this selection unconditionally enables
the Intercom service on the extension.
•
Disabled
- this selection disables the Intercom service.
The
Activation signal
drop-down list has three available
sections:
•
Ring Only If Requested
– this selection allows you to
play audible signal if the
Play audible signal before
Intercom activation
checkbox is
enabled in the call
routing rule of the
PBX-Intercom
call type.
•
Ring On Activation
this selection allows you to play
audible signal before Intercom activation whether the
Play audible signal before Intercom activation
checkbox in the call routing is enabled or not.
Fig.III- 37: Intercom page
•
Silent Activation
this selection allows you to activate the Intercom service silently, without any audible signal whether the
Play audible signal
before Intercom activation
checkbox in the call routing is enabled or not.
Attention:
Intercom will not work if the called extension is in call. If this service is enabled along with Many Extension Ringing, Call Hunting or
Forwarding services, Intercom will not take effect and other high priority services will be primary.
Voicemail Profile
The
Voicemail Profile
page allows you to activate the voicemail
profile based on Caller ID and Presence States.
The
Voicemail Profile
radio buttons allows you to configure the
voice mail profile settings.
•
Use Profile As Requested
- this selection enables the
voicemail profile settings for calls that are made
through a call routing rule of the PBX-Voicemail call
type. Please contact your system administrator to
ensure a corresponding rule is available for your
extension.
•
Use Default Voicemail Settings
selection enables the
default voicemail profile settings. No profile will be
used, regardless of how the call has arrived to
extension.
•
Use Specific Profile
drop-down list allows the
selection of a previously created voicemail profile in
page regardless of how the call
has arrived to extension.
Fig.III- 38: Voicemail Profile page
