Epygi Manual III User Manual Download

Page: 28 / 50

QX50/QX200/QX2000; (SW Version 6.0.x)

QX50/QX200/QX2000 Manual III: Extension User’s Guide

The

Calling Code (#)

requires a key combination to dial the destination phone number. Only numeric characters are allowed for this field. If nonnumeric

symbols are entered and the

Save

button is selected, “Incorrect calling code: no symbol characters allowed” will appear. This field is limited to two digits.

If the calling code already exists in the

Speed Calling Codes

table, the “Speed Calling Code already exists” error will appear when you select

Save

Description

allows entering a short description about the called destination or simply the username of the remote party.

Depending on the selected call type the

Call To

text field requires the SIP address, extension or PSTN number that has to be dialed whenever the calling

code is used. The extension number should be inserted in the

Call To

field for the

PBX

call type. A SIP address should be entered for

SIP

call type. Only SIP

registration username can be inserted here to call to the SIP user registered on the same SIP server that the current extension is registered on. If the SIP

server hostname is omitted, the system will automatically set the current extension's registration server hostname instead. A PSTN number should be

inserted for PSTN call type. The PSTN number length depends on the area code and phone number. For the PSTN call type, the symbols “,”, “p” and “P” are

available to be inserted in this field. These symbols are used to insert a 1 second long pause which might be required by the PSTN dialing rules.

To Add a Speed Calling Code

Press the

Add

button on the

Speed Calling Settings

page. The

Speed Calling Settings - Add Entry

page will appear in the browser window.

Select the call type from the

Call Type

drop down list.

Choose a

Calling Code

and enter the

Description

for the called party.

Enter the destination SIP address, extension or PSTN number (dependant on the chosen call type) in the

Call To

text field according to the entering

rules.

To create the

Speed Calling Code

click on

Save

To Edit a Speed Calling Code

Select the checkbox of the corresponding record that has to is be edited in the

Speed Calling Codes

table

Press the

Edit

button on the

Speed Calling Settings

page. The

Speed Calling Settings-Edit Entry

page will appear in the browser window.

Change the desired fields.

To save the modifications click on

Save

To Delete a Speed Calling Code

Select the checkbox of the corresponding record that should to be deleted from the

Speed Calling Code

table.

Press the

Delete

button on the

Speed Calling

page.

Confirm the deletion by clicking the

Yes

button. The speed calling code with its parameters will be deleted. To abort the deletion and to keep the

original record in the list, select

Account Settings

The

Account Settings

page

provides information on the extension display name, allows changing the user password, enabling user password protection

for incoming/outgoing calls and downloading/uploading of a file with the user-defined voice greetings. All parameters listed on this page may be modified

and submitted. This page consists of the following components:

Extension

shows a non-editable parameter providing

information about the current user extension number.

Display Name

defines an optional parameter used to identify

the caller. Usually the display name appears on the phone

display if a call is placed or a voice mail is sent. The field is not

limited regarding symbol usage but its length is limited to

twenty characters.

Password Protection for:

•