background image

 

 

 

 

 

 

      QX50/QX200/QX2000; (SW Version 6.0.x) 

                                                                                      

24 

               

 

 

               QX50/QX200/QX2000 Manual III: Extension User’s Guide 

 

notification is sent to the voice mail author after the first expiration of the interval defined in the 

Repeat every

 text field. For calls with call type 

different from Callback, the first notification will be sent immediately.  

Restore default Notification Message

 restores the default notification message. If the checkbox is selected, the file upload will be disabled.  

Upload new Notification Message

 will show the attached notification file selected by the current extension. Please note that a different notification 

message can be uploaded in case this service serves as a notification to the extension user (to inform about the new voice mail received) or if it 

serves as a notification for the voice mail author to be informed that the message has been received by the QX IP PBX but is not yet played by the 

extension user). The uploaded file needs to be in the PCMU (CCITT u-law, 8 kHz, 8 bit Mono) wave format, otherwise the system will prevent 

uploading with the "Invalid audio file, or format is not supported" warning message. The system also prevents uploading in case not enough space 

is available on QX IP PBX for the corresponding extension and gives a "You do not have enough space" warning.  

Choose File

 browses for the notification file that must be in PCMU (CCITT u-law, 8 kHz, 8 bit Mono) wave format.  

Download Notification Message 

appears only if a file has been uploaded previously. The link is used to download the audio file to the PC and opens 

the file-chooser window where the saving location can be specified.  

 

The 

ZeroOut

  voice mail feature allows a caller that has reached the called extension's voice mailbox to accelerate the automatic redirection feature 

instead of leaving a message in the extension's Voice Mailbox. To activate this feature, the caller should dial 

0

 digit (see QX IP PBX’s Feature Codes) during 

the voice mail greeting which invites the caller to leave a message. The caller will then be automatically transferred to the destination specified in this 

page. 

 

Enable ZeroOut

 checkbox selection enables the ZeroOut feature and activates the following fields to be inserted: 

 

Redirect Call Type

 drop down list includes the available call types:  

PBX

 - local calls between QX IP PBX extensions and the Auto Attendant  

SIP

 - calls through a SIP server  

PSTN

 - calls through the PSTN 

Auto

 - used for undefined call types. Destination (independent on whether it is a PBX number, SIP address or PSTN number) will be reached 

through Call Routing.  

Redirect Address

 text field requires the destination address where caller should be automatically forwarded in case of activating the ZeroOut feature.  

 

Restore Default Greeting File

 will restore the default greeting file. If the checkbox is selected, the file upload will be disabled.  

 

Upload New Greeting File

 shows an attached greeting file selected by the current user. The greeting file will be played to a caller party when it is entering 

the voice mail system. The uploaded file needs to be in PCMU (CCITT u-law, 8 kHz, 8 bit Mono) wave format, otherwise the system will prevent uploading 

and the "Invalid audio file, or format is not supported" warning message will be received. The system also prevents uploading in case not enough space is 

available on QX IP PBX  for the corresponding extension. In this situation, the "You do not have enough space" warning will be received. Optionally, 

greeting file can be recorded from the phone handset (see Feature Codes). 

 

The 

Choose File 

button helps to choose the desired greeting file that should be in PCMU (CCITT u-law, 8 kHz, 8 bit Mono) wave format. 

Download Greeting File

 appears only if a file has been previously uploaded. The link is used to download the audio file to the PC and opens the file-

chooser window where the saving location can be specified. 

 

Group List 

Group List

 page allows you to define Groups with the specified addresses inside. The 

Group List

 is used to send or forward voice messages (see 

QX IP 

PBX’s Feature Codes

) to the number of addresses simultaneously.  Groups may consist of a variety of PBX and SIP addresses. 

The 

Group List

 page consists of a table where all defined Group 

Keys and the corresponding addresses are listed.  
 
Press on a link in the 

Addresses

 column to access the 

Address 

List for the Group

  page and to modify the addresses of the 

corresponding group. If Group doesn’t include addresses, “no 

address is available” will be displayed in the 

Addresses

 column.  

 
The 

Add

  functional button opens the 

Group List -  Add Entry

 

page where a new Group Key can be defined. 
 
 

 

Fig.III- 6: Group List page  

 

 

Summary of Contents for Manual III



















































Reviews: