&
“Making Wi-Fi Settings by PIN Code Setup (WPS)” on page 31
&
“Making Wi-Fi Direct (Simple AP) Connection Settings” on page 32
&
“Making Advanced Network Settings” on page 32
Making Wi-Fi Settings Manually
You can manually set up the information necessary to connect to an access point from the printer's control panel.
To set up manually, you need the SSID and password for an access point.
Note:
If you are using an access point with its default settings, the SSID and password are on the label. If you do not know the SSID
and password, contact the person who set up the access point, or see the documentation provided with the access point.
1.
Tap
on the home screen.
2.
Tap
Wi-Fi (Recommended)
.
3.
Tap
Start Setup
.
If the network connection is already set up, the connection details are displayed. Tap
Change Settings
to
change the settings.
4.
Tap
Wi-Fi Setup Wizard
.
5.
Select the SSID for the access point.
Note:
❏
If the SSID you want to connect to is not displayed on the printer’s control panel, tap
Search Again
to update the list.
If it is still not displayed, tap
Enter Manually
, and then enter the SSID directly.
❏
If you do not know the SSID, check if it is written on the label of the access point. If you are using the access point
with its default settings, use the SSID written on the label.
6.
Tap the
Enter Password
field, and then enter the password.
Note:
❏
The password is case-sensitive.
❏
If you do not know the password, check if it is written on the label of the access point. If you are using the access point
with its default settings, use the password written on the label. The password may also be called a "Key", a
"Passphrase", and so on.
❏
If you do not know the password for the access point, see the documentation provided with the access point, or
contact the person who set it up.
7.
When you have setup finished, tap
Start Setup
.
User's Guide
Network Settings
29