Epson WorkForce WF-M1030, User Manual

Page: 83 / 110

• Windows Vista : Click and select Control Panel . Click Printer under Hardware and Sound ,
right-click your product name, and select Open . Right click the stalled print job, click Cancel , and
click Yes .
• Windows XP : Click Start and select Printers and Faxes . (Or open the Control Panel , select
Printers and Other Hardware , if necessary, and select Printers and Faxes .) Right-click your
product name, select Open , right-click the stalled print job, click Cancel , and click Yes .
Parent topic: Solving Problems Printing from a Computer
Related tasks
Running a Product Check
Noise Occurs, But Nothing Prints
If your product makes a printing noise, but nothing prints, try these solutions:
• Run a print head nozzle check to see if any of the nozzles are clogged. Then clean the print head, if
necessary.
• Your product will not operate properly while tilted at an angle. Place it on a flat, stable surface that
extends beyond the base of the product in all directions.
Parent topic: Solving Problems Printing from a Computer
Noise When Product Sits for a While
Your product is performing routine maintenance. This is normal.
Parent topic: Solving Problems Printing from a Computer
Product Icon Does Not Appear in Windows Taskbar
If you do not see your product icon in the Windows taskbar, first try restarting your computer. If that does
not work, try this solution:
1. Do one of the following:
• Windows 8 : Navigate to the Start screen, right-click the screen and select All apps . Select
Control Panel > Hardware and Sound > Devices and Printers .
• Windows 7 : Click and select Devices and Printers .
• Windows Vista : Click , select Control Panel , and click Printer under Hardware and Sound .
• Windows XP : Click Start and select Printers and Faxes . (Or open the Control Panel , select
Printers and Other Hardware , if necessary, and Printers and Faxes .)
83