You can also make settings such as the resolution and the sending method in
Scan Settings
or
Fax Send
Settings
if necessary.
5.
Press the
button until return to
Fax
screen, and then press the
x
button.
6.
When sending is complete, remove the originals.
Note:
You can cancel faxing from the
Fax
screen.
Related Information
&
“Placing Originals” on page 51
&
“Sending Faxes Automatically Using the Control Panel” on page 130
&
“Fax Send Settings” on page 138
Sending Different Size Documents Using ADF (ADF Continuous Scan)
Sending faxes by placing originals one by one, or by placing originals by size, you can send them as one document
at their original sizes.
If you place different sized originals in the ADF, all of the originals are sent at the largest size among them. To send
originals at their original sizes, do not place originals with mixed sizes.
1.
Place the first batch of originals at the same size.
2.
Select
Fax
on the home screen.
To select an item, use the
u
d
l
r
buttons, and then press the OK button.
3.
Specify the recipient.
4.
Press the OK button, and then select
Scan Settings
.
5.
Select
ADF Continuous Scan
, and then select
On
.
You can also make settings such as the resolution and the sending method in
Scan Settings
or
Fax Send
Settings
if necessary.
6.
Press the
button until you are returned to the
Fax
screen, and then press the
x
button.
7.
When scanning the first originals is complete and the message
Send another page?
is displayed on the control
panel, select
Yes
, load the next originals, and then press the
x
button.
Note:
If you leave the printer untouched for 20 seconds after prompted to set the next originals, the printer stops storing and
starts sending the document.
8.
When sending is complete, remove the originals.
Related Information
&
“Placing Originals” on page 51
>
Sending Faxes Using the Printer
>
134
