Epson WorkForce WF-2540, User Manual, Page: 142 / 283

7. Use the number buttons on the control panel to enter the current time, select AM or PM if you
selected a 12-hour time format, then press the OK button.
8. Press the up or down arrow buttons to select Daylight Saving Time and press the OK button.
9. Press the up or down arrow buttons to select Summer if Daylight Saving Time (DST) is in effect;
otherwise, select Winter . Then press the OK button.
Note: If your region uses Daylight Saving Time (DST), you must change this setting to match the
season. When you change from Winter to Summer , your product automatically sets its clock ahead
one hour. When you change from Summer to Winter , it sets the clock back one hour.
10. Press the Menu button to exit.
Parent topic: Setting Up Fax Features Using the Product Control Panel
Entering Fax Header Information
Before faxing, add your sender name and fax number to the fax header to identify the source of the faxes
you send.
1. Press the Fax button.
2. Press the Menu button.
3. Press the up or down arrow buttons to select Fax Settings and press the OK button.
You see this screen:
4. Press the up or down arrow buttons to select Communication and press the OK button.
142