Epson WorkForce Pro WP-4520, User Manual

Page: 182 / 295

3. Do one of the following:
• Use the numeric keypad to enter the fax number. You can enter up to 64 characters.
• Press the Redial/Pause button to redial the last dialed fax number.
4. If you need to change any fax settings, press the Menu button, select Send Settings , press the
OK button, and select your settings. When you finish selecting settings, press the Menu button.
5. Press either of the Start buttons.
Note: If your recipient's fax machine does not print in color, your fax is automatically sent in black-
and-white. To cancel faxing, press the Stop/Reset button.
Your product scans your original and prompts you to place additional pages, if necessary.
After scanning your originals, your product dials the number and sends the fax.
Note: If the number is busy or there is a communication problem, your product displays a redialing
message and will redial the number in a few minutes.
Parent topic: Sending Faxes from the Product Control Panel
Selecting Fax Numbers From Speed or Group Dial Lists
You can send a fax from your product control panel by selecting a speed dial or group dial entry from the
list.
1. Place your original on the product for faxing.
2. Press the Fax button.
182