Epson WorkForce Pro WP-4090, User Manual

Page: 154 / 197

• Your product will not operate properly while tilted at an angle. Place it on a flat, stable surface that
extends beyond the base of the product in all directions.
Parent topic: Solving Problems Printing from a Computer
Noise When Product Sits for a While
Your product is performing routine maintenance. This is normal.
Parent topic: Solving Problems Printing from a Computer
Product Icon Does Not Appear in Windows Taskbar
If you do not see your product icon in the Windows taskbar, first try restarting your computer. If that does
not work, try this solution:
1. Do one of the following:
• Windows 7 : Click and select Devices and Printers .
• Windows Vista : Click , select Control Panel , and click Printer under Hardware and Sound .
• Windows XP : Click Start and select Printers and Faxes . (Or open the Control Panel , select
Printers and Other Hardware if necessary, and Printers and Faxes .)
2. Right-click your product name, select Printing Preferences , and select your product name again if
necessary.
3. Click the Maintenance tab.
4. Click the Extended Settings button.
5. Select Enable EPSON Status Monitor 3 , then click OK .
6. Click the Monitoring Preferences button.
7. Click the Shortcut Icon box.
8. Click OK to close the open program windows.
Parent topic: Solving Problems Printing from a Computer
Error After Cartridge Replacement
If you see an error light or error message after you replace an ink cartridge, follow these steps:
1. Make sure the print head is in the ink cartridge replacement position. (The ink cartridge holder should
be beneath the cutout in the product case, allowing access to the cartridges.)
154