Selecting Wireless Network Settings From the Control Panel
You can select or change wireless network settings using your product control panel.
To install your product on a wireless network, follow the instructions on the
Start Here
sheet and install
the necessary software from the product CD. The installer program guides you through network setup.
Note:
Breakdown or repair of this product may cause loss of fax and network data and settings. Epson is
not responsible for backing up or recovering data and settings during or after the warranty period. We
recommend that you make your own backup or print out your fax and network data and settings.
1.
Press the
Setup
button.
2.
Press the arrow buttons to select
Network Settings
and press the
OK
button.
3.
Select
Wireless LAN Setup
and press the
OK
button.
You see this screen:
4.
Select
Setup Wizard
and press the
OK
button.
Note:
If you need to disable the wireless network to set up your product on an Ethernet network,
select
Disable Wireless LAN
instead. Then follow the instructions on the
Start Here
sheet to set up
your product on a wired network and install the necessary software from the product CD. The
installer program guides you through network setup.
24
Summary of Contents for WorkForce 545
