4.
Tap the authentication method of the email server you are using, and then the settings screen is displayed.
c
Important:
The following authentication methods are available.
❏
Off
❏
POP before SMTP
❏
SMTP-AUTH
Contact your internet service provider to confirm the authentication method of the email server.
The printer may not be able to communicate with an email server even if the authentication method is
available since security may be enhanced (for example SSL communication is necessary). Visit the Epson
support website for the latest information.
(Europe)
(outside Europe)
5.
Make the appropriate settings.
The necessary settings vary depending on the authentication method. Enter the information for the email
server you are using.
6.
Tap
Proceed
.
Note:
❏
If an error message is displayed, check if the email server settings are correct.
❏
When you cannot send an email even if the connection check succeeds, check the authentication method for the
email server you are using.
Email Server Setting Items
Items
Explanations
Authenticated Account
If you select
SMTP-AUTH
or
POP before SMTP
as the
Server Authentication Method
, enter the user name (email
address) registered to the email server within 255 characters
or less.
Authenticated Password
If you select
SMTP-AUTH
or
POP before SMTP
as the
Server Authentication Method
, enter the password of the
authenticated account within 20 characters or less.
Sender's Address
Specify the email address that the printer uses to send
emails. You can specify the existing email address. To make it
clear that the email is being sent from the printer, you can
acquire an address specifically for the printer and enter it
here.
SMTP Server Address
Enter the server address of the server that sends the email
(SMTP server).
SMTP Server Port Number
Enter the port number of the server that sends the email
(SMTP server).
User's Guide
Preparing the Printer
43
