229
fax calls. Select the ring pattern assigned to fax calls in the Distinctive Ring Setting. If you select
On
or a ring pattern other than
All
, Receive Mode is automatically set to
Auto
.
10. On the Receive Mode Setting screen, do one of the following:
• If you have connected an external telephone or answering machine to the product, select
Yes
and
go to the next step.
• If you did not connect an external telephone or answering machine, select
No
and go to step 12.
(Receive Mode is automatically set to
Auto
; otherwise you cannot receive faxes.)
11. On the next Receive Mode Setting screen, select
Yes
to receive faxes automatically or select
No
to
receive faxes manually.
Note:
If you connect an external answering machine and select to receive faxes automatically, make
sure the
Rings to Answer
setting is correct. If you select to receive faxes manually, you need to
answer every call and use the product’s control panel or your phone to receive faxes.
12. On the Proceed screen, confirm the displayed settings and select
Proceed
, or press the back arrow
to change the settings.
13. On the Run Check Fax Connection screen, select
Start Checking
and follow the on-screen
instructions to check the fax connection and print a report of the check result. If there are any errors
reported, try the solutions on the report and run the check again.
Note:
If the Select Line Type screen appears, select the correct line type. If the Select Dial Tone
Detection screen appears, select
Disable
. However, disabling the dial tone detection function may drop
the first digit of a fax number and send the fax to the wrong number.
Parent topic:
Related tasks
Entering Characters on the LCD Screen
Selecting the Line Type
If you connect the product to a PBX phone system or terminal adapter, you must change the product's
line type. PBX (Private Branch Exchange) is used in office environments where an external access code
such as “9” must be dialed to call an outside line. The default Line Type setting is PSTN (Public Switched
Telephone Network), which is a standard home phone line.
Note:
This setting can be locked by an administrator. If you can't access or change this setting, contact
your administrator for assistance.
Summary of Contents for WF-C20590 Series
