A
Make sure that no warnings or errors are indicated in the control panel.
B
Access the Epson Printer Utility 4.
&
“Accessing the printer driver for Mac OS X” on page 27
C
Click the
Head Cleaning
icon.
D
Follow the on-screen instructions.
Using the product buttons
Follow the steps below to clean the print head using the product buttons.
A
Make sure that no warnings or errors are indicated in the control panel.
B
Press the
B
button or
I
button for three seconds.
Select either of the buttons according to the result of the nozzle check.
The product starts cleaning the print head and the
P
light begins flashing.
c
Important:
Never turn off the product while the
P
light is flashing. Doing so may damage the product.
C
When the
P
light stops flashing, print a nozzle check pattern to confirm that the head is clean.
&
“Checking the Print Head Nozzles” on page 52
Aligning the Print Head
If you notice a misalignment of vertical lines or horizontal banding, you may be able to solve this problem by using the
Print Head Alignment utility in your printer driver.
Refer to the appropriate section below.
User’s Guide
Maintaining Your Product and Software
55