Epson WF-2750, User Manual

Page: 163 / 295

163
Setting Options Description
Dial Tone Detection On Automatically dials the number you enter for faxing
when the product detects a dial tone.
Off Turns off automatic dial tone detection, which may be
necessary if the product is connected to a PBX
(Private Branch Exchange) or a TA (Terminal
Adapter). The product may drop the first digit of a fax
number and send the fax to the wrong number.
Line Type PSTN Selects a standard phone line (Public Switched
Telephone Network).
PBX Selects Private Branch Exchange, the type of phone
line used in office environments where an access
code such as
9 must be used to call an outside line
Header Fax Header Lets you set up the header information for outgoing
faxes.
Your Phone Number
Parent topic: Setting Up Fax Features Using the Product Control Panel
Receive Settings - Fax
Set the receive options you want to use for incoming faxes.
Setting Options Description
Receive Mode Manual Lets you confirm whether an incoming fax should be
printed; a telephone must be connected to the
product.
Auto Automatically receives and prints faxes.
Distinctive Ring All If you are using a Distinctive Ring Service on your
phone line, your telephone company can assign two
or more phone numbers to the same line and assign
different ring patterns to each. If you use this service,
select the number of rings for your fax number so your
product can receive faxes on the correct number of
rings.
All works for phone lines that do not use this
service.
Single
Double
Triple
Double&Triple