197
5.
Press the left or right arrow buttons on the remote control to select the identification number you
want to use for the projector. Then select
Set
and press
Enter
.
Repeat these steps for all the other projectors you want to operate from one remote control.
Note:
If you don't know the projector's ID, hold down the
ID
button and press the
i
button to temporarily
display the projector's ID on the screen.
Parent topic:
Projector Identification System for Multiple Projector Control
Setting the Remote Control ID
The remote control's ID is set to
0
by default so it can operate any compatible projector. If you want to set
the remote control to operate only a particular projector, you need to set the remote control's ID to match
the projector's ID.
1.
Turn on the projector you want the remote control to operate with exclusively.
2.
Set the remote control
ID
switch to
On
.
3.
Hold down the
ID
button on the remote control while you press the numeric button that matches the
projector's ID. (Enter a two-digit number, such as
01
for projector ID 1.) Then release the buttons.
Summary of Contents for V11H944820
