Epson V11H923620 User Manual Download Page 185

Page: 185 / 303

185

•

Rename Memory

: Renames a saved memory

•

Reset Memory Settings

: Delete all saved memory

Press

Esc

to exit.

Parent topic:

Adjusting Projector Features

Copying Menu Settings Between Projectors

After you select menu settings for your projector, you can transfer them to another projector of the same
model.

Note:

Copy the projector's settings before you adjust the projected image using the projector's settings.

Any saved User's Logo setting on the projector will transfer to the other projector.

Caution:

If the copy process fails due to a power failure, communication error, or for any other reason,

Epson will not be responsible for any repair costs incurred.

The following settings will not transfer between projectors:

• Light Source Hours

• Status

The following settings will not transfer between projectors if you set the

Batch Setup Range

setting to

Limited

• Password Protection settings

•

EDID

in the Signal I/O menu

• Network menu settings

Note:

In addition to the methods covered in this section, you can also copy and transfer settings to

multiple projectors over a network using the Epson Projector Management software. See the online

Epson Projector Management Operation Guide

for instructions. You can download the latest software

and documentation from the Epson website.

Saving Settings to a USB Flash Drive
Transferring Settings from a USB Flash Drive
Saving Settings to a Computer
Transferring Settings from a Computer

Parent topic:

Adjusting Projector Features

Summary of Contents for V11H923620
















































































































































































































































































































Search results

Summary of Contents for V11H923620

Reviews:

Epson V11H923620, User Manual, Page: 185 / 303

Search results

Summary of Contents for V11H923620

Reviews: