72
List of ESC/VP21 Commands
Command List
When a power on command is sent to the projector, the power will turn on
and the projector will change to warm-up mode. When the power has
turned on, a colon ":" (3Ah) will be returned.
When the projector executes a command, it returns a ":" and waits for the
next command to be sent.
If command processing terminates with an error, the projector outputs an
error message and then returns the ":" code.
* When issuing any of the above commands, tack a Carriage Return (CR)
code (0Dh) on to the end.
Cable Layouts
Connector shape: USB (type B)
Item
Command
Power ON/OFF
ON
PWR ON
OFF
PWR OFF
Signal selection
Computer (Auto)
SOURCE 1F
Computer
SOURCE 11
Component Video
SOURCE 14
Video
SOURCE 41
S-Video
SOURCE 42
A/V Mute ON/OFF
ON
MUTE ON
OFF
MUTE OFF
A/V Mute Selection
Black
MSEL 00
Blue
MSEL 01
User’s Logo
MSEL 02
USB connection
<At the projector>
<At the computer>
(type B)
