66
Saving a User's Logo
You can record the image that is currently being projected as a user's logo.
PROCEDURE
A
Project the image you would like to use as the user’s
logo, and then display the configuration menu.
B
Select “Extended” from the configuration menu, and
then select “User’s Logo.”
For details on this operation, refer to
s
Check which buttons on the remote control or the control panel
you can use, and the operations they perform, in the guide at the
bottom of the screen.
When a user's logo is recorded, the previous user’s logo
will be erased.
Remote control
Control panel
• If the “User’s Logo Protect” function of “Password
Protect” is set to “ON,” a message is displayed and the
user's logo cannot be recorded. To record a user's logo,
set “User’s Logo Protect” to “OFF” first.
s
• If keystone correction, Zoom adjustment, or E-Zoom
and so on, have been carried out, the function currently
being performed is cancelled when the “User’s Logo”
menu is selected.
