6
TM-U950 User’s Manual
English
8. To remove the journal paper roll, first
lift the take-up spool and cut the paper.
Then remove the take-up spool. See
illustration
6
.
9. For either a journal or receipt paper roll,
next press the release lever (marked
PRESS
) on the appropriate side of the
printer, pull out the paper, and remove
the roll.
Inserting Slip Paper
Notes:
Do not use wrinkled, folded, or curled paper.
Use only slip paper that matches the printer’s specifications.
To prevent paper jams, install both paper rolls in the printer even if you
plan to print only on slip paper.
1. When the
SLIP
LED flashes,
insert slip paper, using the right
edge of the slip paper inlet as a
guide. See illustration
7
.
2. When the printer detects the
paper, it automatically draws it
in and begins printing.
CAUTION:
Be sure to put the caution label exactly in the position shown. If you put
it another place, such as over the slip paper inlet, the printer may be
damaged.
Installing a Ribbon
Use the EPSON ERC-31. The use of any ribbon cassettes other than
those approved by Epson may damage the printer and will void the
warranty.
1. Turn the printer on and open the ribbon cover.
2. Turn the ribbon cassette’s knob 2 or 3 times in
the direction of the arrow in illustration
8
to
take up any slack.
3. Insert the ribbon in the printer and rotate the
cassette’s knob 2 or 3 more times to place the
ribbon in the correct position.
6
✄
7
8
Summary of Contents for U950 - TM B/W Dot-matrix Printer
Page 80: ...Printed in China ...
