4
TM-U950 User’s Manual
English
Control Panel
RECEIPT FEED button
Press to feed receipt paper; hold down to feed continuously.
JOURNAL/SLIP FEED button
In roll paper mode, feeds the journal roll. In slip mode (when the
SLIP
LED is on or flashing and slip paper is inserted), feeds slip paper.
POWER LED
On when the printer is on.
ERROR LED
Indicates an error.
RECEIPT OUT LED
Indicates a receipt paper near end or out.
JOURNAL OUT LED
Indicates a journal roll paper near end or out.
SLIP LED
Indicates slip mode. Flashes while waiting for a slip to be inserted or
removed.
Removing the Transportation Damper
The printer is protected during
shipping by a transportation damper
that you must remove before turning
on the printer.
Pull the damper out, as shown in
illustration
1
.
Note:
Before shipping the printer, reinstall the
transportation damper.
Using the Power Switch Cover
WARNING:
If an accident occurs with the power
switch cover attached, unplug the
power cord immediately. Continued
use may cause fire.
The enclosed power switch cover
ensures that the power switch is not
pressed accidentally. To use this cover,
install it as shown in illustration
2
.
1
2
Summary of Contents for U950 - TM B/W Dot-matrix Printer
Page 80: ...Printed in China ...