103
Chapter 6 Replacement of the TM-T88VI/TM-T88V
Manual Paper Feed
As same with the TM-T88VI/TM-T88V, manual paper feed is not possible with the TM-T88VII.
Receive Buffer
The receive buffer of the TM-T88VII is fixed to 4 KB.
Memory Capacity
The sizes of the download buffer and NV graphics data of the TM-T88VII are the same as those of the
TM-T88VI/TM-T88V.
Electrical Characteristics
The operating voltage of the TM-T88VII is DC24 ± 7%, the same as the TM-T88VI/TM-T88V. The current
consumption differs, depending on the print duty. When you set the print speed to 500 mm/s, the amount of
electricity consumed increases.
DIP Switches
The functional assignments of DIP switches for the TM-T88VII differ from the TM-T88VI/TM-T88V.
See
"Setting the DIP Switches" on page 51
for more details.
Printer Status
The TM-T88VII goes to the same status under the same conditions as the TM-T88VI/TM-T88V. You can
replace the TM-T88VI/TM-T88V with the TM-T88VII without modifying applications.
Logo Registration
The TM-T88VII can register logos in the NV memory (NVRAM) with the Setup Utilities.
Driver Compatibility
You can operate the TM-T88VII with a driver for the TM-T88VI/TM-T88V.
USB Low Power Consumption Mode
With the TM-T88VII, you can enable the USB low power consumption mode in the software setting mode.
