Epson TM-T88VI-DT2 Technical Reference Manual Download Page 94

Page: 94 / 165

Chapter 5 TM-DT Software System Development

Settings - System settings - Proxy settings

Performs settings for this product's proxy and the services that use the proxy.

Settings - System settings - Server authentication

Registers certificates to this product and sets or deletes registered certificates.

Item

Description

Proxy URL

Input the URL for the proxy server in use.

Proxy port no.

Input the port number for the proxy server in use.

Password

Proxy settings

Wen content update

Sets whether or not to use proxy for automatic update of Web content.

Server direct print

Sets whether or not to use proxy for server direct print.

Status notification

Sets whether or not to use proxy for status notification.

Store/restore settings

Sets whether or not to use proxy for store/restore settings.

Update Web service function

Sets whether or not to use proxy for the update Web service function.

Deployment

Sets whether or not to use proxy for deployment.

Device Data Notification

Sets whether or not to use proxy for device data notification.

Apply

Registers the settings to this product.

Item

Description

Import Certificates

Certificate file

Specifies the certificate file to be registered to this product.

Update

Registers the specified certificate file to this product.

Certificate List

Issuer

The list of certificate files and detailed information registered to this
product is displayed. By applying a tick to the listed certificates, it
becomes possible to use [Delete].

Issuer to

Detailed information of certificates can be confirmed.

Delete

Delete the ticked certificates.

Summary of Contents for TM-T88VI-DT2






































































































































































Search results

Summary of Contents for TM-T88VI-DT2

Reviews:

Related manuals for TM-T88VI-DT2

Brands by name

Popular brands

Epson TM-T88VI-DT2, Technical Reference Manual

Search results

Summary of Contents for TM-T88VI-DT2

Reviews:

Related manuals for TM-T88VI-DT2

Brands by name

Popular brands