Epson TM-T88VI-DT2, Technical Reference Manual

Page: 88 / 165

88
Chapter 5 TM-DT Software System Development
5
Settings - Web service settings - Print Settings - Spooler
Performs settings for spooler and print forwarding.
You can set the spooler and print forwarding when you have set [Enable] under [Spooler] in the "Settings - Web
service settings - Startup settings" on page 82 .
Item Description
Spooler
Settings Retry Count Sets the number of retries for when printing error occurs.
When printing fails for the set number of times, printing is performed
from the forwarded printer if the forwarding path is set.
Interval (sec.) Sets the interval between retries when printing error occurs.
Message Text Message Text Sets the character string of the notice message that is printed when for-
ward processing takes place.
Text Attributes Sets the character decoration of the notice message.
Position Sets the printing position of the notice message.
Cut Sets whether or not to cut the paper after printing the notice message.
Apply Saves the notice message settings to this product.
Print forward-
ing route to be
registered Primary Printer Sets the printer to be set for forwarding path.
Secondary Printer Sets the forwarded printer for cases where the primary printer fails to
print.
Tertiary Printer Sets the forwarded printer for cases where the primary printer and the
secondary printer fail to print.
Register Saves the forwarding path settings to this product.
Registered Print forwarding routes A list of the registered forwarding paths is displayed.
Delete Deletes the settings of ticked forwarding paths.