Epson TM-T88VI-DT2 Technical Reference Manual Download Page 54

Page: 54 / 165

Chapter 4 Windows Settings

Enabling or Disabling ePOS-Device

On this product, TM-DT software operates on Windows. If using this product with the PC-POS system do not
use this software.

If operation of this software is disabled, the useable memory can be increased by 100MB or more.

Enabling ePOS-Device Service

Run [ePOS-Device Enabled] from the shortcut on the desktop.

Disabling ePOS-Device Service

Run [ePOS-Device Disabled] from the shortcut on the desktop.

Speaker Volume Setting

Volume of the speakers equipped in this product can be adjusted using the speaker volume adjustment function
in Windows.

ePOS-Device Service is set to [Enabled] in the default settings.

•

Following functions will be stopped, when ePOS-Device Service is disabled.

∗

TM-DT software

∗

TMNet WebConfig

∗

Store/restore settings of this product

•

You will no longer be able to call TMNet WebConfig from the TM-T88VI-DT2 Utility.

Summary of Contents for TM-T88VI-DT2






































































































































































Search results

Summary of Contents for TM-T88VI-DT2

Reviews:

Related manuals for TM-T88VI-DT2

Brands by name

Popular brands

Epson TM-T88VI-DT2, Technical Reference Manual

Search results

Summary of Contents for TM-T88VI-DT2

Reviews:

Related manuals for TM-T88VI-DT2

Brands by name

Popular brands