Epson TM-T88VI-DT2 Technical Reference Manual Download Page 53

Page: 53 / 165

Chapter 4 Windows Settings

Windows Settings

Windows 10 IoT Enterprise

Windows Initial Settings

The following explains the procedures for the Windows initial settings when you turn on the power for this
product for the first time.

Making sure that this product power is off, connect the display, keyboard and mouse.

Turn on the product.

The Windows setup screen is displayed the first time you start the product after recovering the OS
using the recovery DVD.

When the log-on screen appears, enter the password.

For the initial settings, the user name is "EPSON-USER" and the password is "T88VI-DT2".

The Windows desktop is displayed. Select [Start], then [Control Panel], and [Date and
Time]. The "Date and Time Properties" window is displayed. Set the date, time, and
the time zone.

Starting Up and Shutting Down Windows

Starting Up Windows

Windows starts up when power to this product is turned on.

Shutting Down Windows

Power to this product is turned off when Windows is shut down.

Date, time, and time zone can be set later.

Summary of Contents for TM-T88VI-DT2






































































































































































Search results

Summary of Contents for TM-T88VI-DT2

Reviews:

Related manuals for TM-T88VI-DT2

Brands by name

Popular brands

Epson TM-T88VI-DT2, Technical Reference Manual

Search results

Summary of Contents for TM-T88VI-DT2

Reviews:

Related manuals for TM-T88VI-DT2

Brands by name

Popular brands