48
Chapter 3 Printer Functions and Settings
3
NV Graphics Information Print Mode
Prints the following NV graphic information registered to the printer.
•
Capacity of the NV graphics
•
Used capacity of the NV graphics
•
Unused capacity of the NV graphics
•
Number of NV graphics that are registered
•
Key code, number of dots in X direction, number of dots in Y direction to be defined.
•
NV graphics data
Follow the steps below.
1
After running a self-test, hold down the Feed button for at least one second, and then
select the Mode selection.
The Mode selection guidance is printed, and the Paper LED flashes.
2
After briefly (less than one second) pressing the Feed button once, hold it down for at
least one second, to print the NV graphics information.
After information printing, the Mode selection guidance is printed again.
3
To finish, turn off the power, or select “Exit and Reboot Printer”.
Receipt Enhancement Information Print Mode
You can check the following items using the R/E information mode:
•
Automatic top logo setting
•
Automatic bottom logo setting
•
Extended settings for automatic top/bottom logo
Follow the steps below.
1
After running a self-test, hold down the Feed button for at least one second, and then
select the Mode selection.
The Mode selection guidance is printed, and the Power LED flashes.
2
After briefly (less than one second) pressing the Feed button twice, hold it down for
at least one second, to print the R/E information.
After information printing, the Mode selection guidance is printed again.
3
To finish, turn off the power, or select "Exit and Reboot Printer".
For details on NV graphics, see
"NV Graphics Memory" on page 40
.
