Epson TM-T88VI-DT2 Technical Reference Manual Download Page 23

Page: 23 / 165

Chapter 2 Setup

Connecting the AC Adapter

Follow the steps below to connect the AC adapter.

Firmly insert the DC connector of the AC adapter all the way into the DC-in connector
on the product. (

➀

in the illustration)

Firmly insert the connector of the AC cable all the way into the AC inlet on the AC
adapter. (

➁

in the illustration)

Firmly insert the plug all the way into the grounded wall outlet. (

➂

in the illustration)

Set the AC adapter so that its label side is facing down.

WARNING

Be sure to use the specified AC adapter [AC Adapter, T1(Model: M284B)] only.

Be sure to leave a space between the AC adapter and the main unit.

Summary of Contents for TM-T88VI-DT2






































































































































































Search results

Summary of Contents for TM-T88VI-DT2

Reviews:

Related manuals for TM-T88VI-DT2

Brands by name

Popular brands

Epson TM-T88VI-DT2, Technical Reference Manual

Search results

Summary of Contents for TM-T88VI-DT2

Reviews:

Related manuals for TM-T88VI-DT2

Brands by name

Popular brands