Epson TM-T20II-i Technical Reference Manual Download Page 108

Page: 108 / 190

108

System Settings - Time - Time

me for

he TM-T20II-

Admin Settings - Maintenance - Reset

rese

work f

s a

d res

ore

he se

tting

s for EPSON TMNe

WebCo

fac

ory defa

tting

Item

Description

Time

Sets the time.

Clicking [Get Time] shows the present time.

Time Zone (Hour)

Sets the time zone.

Time Server

Setting

Use Time Server

Sets whether to use the time server or not for time

setting.

Get Time Server

Sets the method of getting the IP address/host name

for the time server.

Time Server

Sets the IP address/host name for the time server when

[Get Time Server] is set to [Manual].

Time Server Status

Shows the result of last getting time from the time server.

Apply

Saves settings to TM-T20II-i.

Item

Description

Reset

Restarts the network functions while retaining the network setting values such as IP

address. The settings for EPSON TMNet WebConfig other than the network settings

are retained.

Factory Default

Restores the settings for EPSON TMNet WebConfig to the factory default settings.

All the settings except for the internal time are initialized.

Self-signed certificates, Web contents, and PHP contents registered to this product

are also deleted. If a microSD card is inserted in this product, only the files in the

webapp folder are deleted. Other folders and files are not deleted.

Summary of Contents for TM-T20II-i































































































































































































Search results

Summary of Contents for TM-T20II-i

Reviews:

Related manuals for TM-T20II-i

Brands by name

Popular brands

Epson TM-T20II-i, Technical Reference Manual

Search results

Summary of Contents for TM-T20II-i

Reviews:

Related manuals for TM-T20II-i

Brands by name

Popular brands