37
Chapter 2 Setup
Charging the Battery
Charging the Battery using the Included USB Cable
1
Connect the included USB-C cable to the printer.
2
Connect the USB-C cable to a commercially available USB power adapter or
computer.
3
The charge LED lights up when charging starts.
If the battery level is close to full, charging will not start.
Check the battery level with the battery LED.
4
The charge LED turns off when charging is complete.
5
Disconnect the USB-C cable from the printer.
•
When charging the battery, install the battery to the printer.
•
Charge the battery in an environment of approximately 0 to 40 °C (32 to 104 °F).
•
When the printer is used for the first time, the battery needs to be charged for approximately 2.5
hours.
•
Use a USB Type-C power adapter or USB port that complies with the USB Type-C Standard.
•
Only USB Type-C standard power mode is supported. The charging time varies depending on
the power supply capability and settings of the USB power adapter and port.
U
