TM-P60II with Peeler User’s Manual
11
English
Never disassemble or modify the battery pack. This may cause fire, explosion,
leakage, overheating or damage.
Do not expose the battery to fire or heat it. This may cause fire, explosion, leakage,
overheating or damage.
WARNING:
If you notice a strange odor, overheating, discoloration, distortion, or other abnormality of
the battery, remove it from the printer or charger, and do not use it. Continued use may
cause overheating, fire or explosion.
Immediately move the battery pack away from fire or flame if it produces a strange odor
or leakage. Leaked electrolyte may flash off, leading to fire or explosion.
Should any battery liquid get on skin or clothing, promptly wash it off with clean
water. If you do not, the liquid may damage your skin.
Do not expose the battery to water. Do not allow water to contact the terminals. This
may cause fire, overheating, or electric shock.
Be sure to use and charge the specified battery OT-BY60II. Using a battery other than
the one specified may cause fire, explosion, leakage, overheating, or other
damage.
Safety Label
The caution label on the product indicates the following precaution.
CAUTION:
During printing or after printing, the thermal head can be very hot.
Restriction of Use
When this product is used for applications requiring high reliability/safety, such
as transportation devices related to aviation, rail, marine, automotive, etc.;
disaster prevention devices; various safety devices, etc.; or functional/precision
devices, etc.; you should use this product only after giving consideration to
including fail-safes and redundancies into your design to maintain safety and
total system reliability. Because this product was not intended for use in
applications requiring extremely high reliability/safety, such as aerospace
equipment, main communication equipment, nuclear power control equipment,
or medical equipment related to direct medical care, etc., please make your own
judgment on this product’s suitability after a full evaluation.
Notes on Use
❏
The printer does not operate only with the AC adapter. Always install the
enclosed battery OT-BY60II in the printer even when using the AC adapter.
❏
Be sure to use the power switch to turn the printer on and off.
❏
To communicate with a computer via a USB cable, connect the cable before
turning on the printer.
❏
To use the USB cable, it is recommended to secure it to avoid stress on it.
❏
Be sure not to open the roll paper cover when the printer is operating.
❏
Protect the printer from impact.
❏
Do not apply excessive force to the printer case.
❏
Do not place food or beverages such as coffee on the case of the printer.
❏
When the wireless connection is ended while the printer is offline, reconnection
may not be possible. In such case, remove the cause of offline and reconnect it.
❏
If you establish a radio connection between the host computer and the printer
each time you start printing instead of maintaining the connection, it may take a
while between the time you send a print job and the time that the printer actually
starts printing. This happens because connecting the host computer and the
printer requires some time. The time required for connection depends on the
operating environment.