58
Chapter 4 Advanced Usage
Overview of Each Function
Print Density
Monochrome
Selectable from 70 to 130% (5% increment)
Initial setting: 100%
To ensure good print quality, it is recommended to set the print density according to the paper used. See
for setting instructions.
Transmission of status information
✔
✔
Auto power off
✔
✔
Paper Position at Power On
✔
✔
Resizing method for graphic data scaling
✔
Batch rotate print (Upside Down)
✔
Method for canceling recoverable error
✔
Handshaking (Condition for BUSY)
✔
Battery charge mode
✔
Operation mode when battery is low
✔
Desktop Mode
✔
✔
•
When the print density level is increased, print speed may be reduced.
•
When print density is increased, paper dust tends to adhere to the print head surface, which
may cause printing defects such as blurred prints.
Item \ Method
Software
Setting Mode
TM-P20II Utility
TM Utility
Web Config
(Wi-Fi model)
