3-10
Adjusting
Rev. A
Confidential
5. While using the thickness gauges, adjust the stopper screw of the platen set so that the
positions indicated below are 0.5
±
0.05 mm.
The stopper screw of the platen set is located here.
Figure 3-9
Note:
The following shows the conditions for adjusting the platen gap to 0.5
±
0.05 mm.
❏
The 0.45 mm thickness gauge falls under its own weight.
❏
The 0.50 mm thickness gauge is pinched and will not fall between the platen and the print
head unit
.
6. Attach the ribbon cassette cover and the carriage cover set frame.
20mm
40mm
0.5 +/- 0.05mm
Screw
Platen set
Print Head
Screw
Summary of Contents for TM-H6000
