Epson TM-290-II, Operator'S Manual

Page: 51 / 62

APPENDIX
APPENDIX A General Specifications
1.
Printing Specifications
(1)
Print
method:
(2) Head
wire configuration:
(3) Printing direction:
(4) Lines per second:
(5) Characters per line:
(6) Characters per inch:
(7) Paper feed speed:
2. Character Specifications
(1) Character set:
(2) Character structure:
(3) Character size:
Impact dot matrix
Shuttle-type 7 pin
Uni-directional
Refer to Table A. 1
Refer to Table A. 1
Refer to Table A. 1
Approx. 25 lines/sec (105 mm/sec)
(When the ESC+d+(n) and
FF
commands
are selected)
Alphanumeric characters: 95
Katakana:
64
International:
32
Extended Graphics:
128
5x7: l-dot spacing (normal dot)
7x7: 3-dot spacing (half dot)
Refer to Table A. 1
Table A.1 Lines Per Second, Characters Per Inch, Characters Per Line,
Character Size
Character Structure Character tine Per Characters Character Size
(Horizontal Character Per Inch
(mm)
X Vertical) Set (mm)
Second
Per tine
(LPS) (Column) (Width x Height)
5 x 7 ANK
0 . 6 3
3 5
1 . 6 X 2 . 9
Graphics
0 . 3 1 5 1 . 9 t o 2 . 3
Approx.
1 . 9 x 2 . 9
7 x 7
ANK 0.63 ____ Approx.
1.3x2.9 _____
Graphics 0.315 1.9 to 2.3 42
1 . 6 X 2 . 9
- 4 6 -