Paper
Output
Printed paper is ejected from the front of the printer. Epson recommends that you use genuine Epson paper
(available in 5, 6, or 8 inch widths), but you can use a variety of roll paper in sizes from
3.5
to 8.3 inches wide.
By attaching the optional print tray or large print tray, you can collect multiple print outs. See the following for
more details.
Ejecting Paper
41
* For prints longer than 12 inches (305 mm), remove the optional print tray or the large print tray, and eject one copy at a time
from the front of the printer.
Print Size
Output Location
Capacity
Length
*
Width
Glossy/Luster
Matte
3.5 to 4 inches
(89 to 102 mm)
5 to 8 inches
(127 to 203 mm)
Print tray (optional)
20 copies
20 copies
4 to 8 inches
(102 to 203 mm)
Print tray (optional)
20 copies
10 copies
Large print tray (optional)
5 copies
1 copy
8 to 12 inches
(203 to 305 mm)
Large print tray (optional)
5 copies
1 copy
Summary of Contents for SureLab D800 Series
Page 1: ...Epson SureLab D800 Series Operation Guide ...
Page 47: ...B Pinch the handle and move it to match the length of the printer size Ejecting Paper 47 ...
Page 88: ...F Remove the roll paper spindle G Lift the rear plate Troubleshooting 88 ...
Page 91: ...N Check that the light turns off and the light is lit and isn t flashing Troubleshooting 91 ...
