Epson SureLab D800 Series Operation Manual Download Page 17

Page: 17 / 108

Notes on the Power Supply

Warning

Use only the type of the power supply indicated on the label.

Electric shock or fire could occur.

Do not use the power plug if any foreign materials such as dust are stuck to it.

Electric shock or fire could occur.

Make sure the power plug

fully inserted into the electrical outlet.

Electric shock

or fire could occur.

Do not use the power cable if it is damaged.

Electric shock or fire could occur.

Contact your local dealer if the power cable is damaged.

Note

the following points to avoid damaging the power cable

❏

Do not modify the power cable

❏

Do not put heavy objects on the power cable

❏

Do not bend, twist, or pull

❏

Do not place it near heating appliances

Do not plug in or unplug the power cable with wet hands.

Electric shock could occur.

Do not perform daisy-chain wiring for the power cable.

It could overheat and cause a fire.

Take power directly from a residential electrical outlet.

Unplug the power cable periodically and clean between the blades and the base of the blades.

If the power cable is left plugged in for an extended period of time, dust could accumulate around the edge of the
plug which could cause a short-circuit and a fire.

When unplugging the power cable from the electrical outlet, grasp the plug itself and not the cable.

The cable could be damaged or the plug could be deformed and an electric shock or fire could occur.

Before Use

Summary of Contents for SureLab D800 Series













































































































Search results

Summary of Contents for SureLab D800 Series

Reviews:

Related manuals for SureLab D800 Series

Brands by name

Popular brands

Epson SureLab D800 Series, Operation Manual

Search results

Summary of Contents for SureLab D800 Series

Reviews:

Related manuals for SureLab D800 Series

Brands by name

Popular brands