Epson SureLab D800 Series Operation Manual Download Page 102

Page: 102 / 108

Place your hands at the points indicated in the photo, and then lift.

Important:

❏

Only hold the required area. Otherwise, it may breakdown.

❏

Move the printer with ink cartridges installed. Do not remove the ink cartridges; otherwise, the nozzles may
be clogged and make it impossible to print, or ink may leak.

❏

When moving the printer, do not tilt it. Ink could leak out.

Preparing to Move

Make the following preparations in advance before moving the printer.

❏

Turn off the printer and remove all cables.

❏

Remove any trays if they are installed.

❏

Remove any paper.

After Moving

After moving, make sure that the print head is not clogged before use.

See

"Maintenance Tool Operation Guide"

Appendix

102

Summary of Contents for SureLab D800 Series













































































































Search results

Summary of Contents for SureLab D800 Series

Reviews:

Related manuals for SureLab D800 Series

Brands by name

Popular brands

Epson SureLab D800 Series, Operation Manual

Search results

Summary of Contents for SureLab D800 Series

Reviews:

Related manuals for SureLab D800 Series

Brands by name

Popular brands