manualshive.com logo in svg

Epson SureColor SC-F9330 Series, User Manual

Share
Download
Epson SureColor SC-F9330 Series User Manual Download Page 82

Head cleaning procedure

Buttons that are used in the following settings

A

After confirming that the printer is ready, press
the 

#

 button.

The Maintenance menu will be displayed.

To clean while printing, press the 

W

 button.

B

Use the 

d

/

u

 buttons to select 

Cleaning

 and press

the 

Z

 button.

C

Select a cleaning level, and then press the 

Z

button.

There are two levels available for head cleaning.

Perform 

Cleaning (Light)

 first. Do 

Cleaning

(Heavy)

 if there are faint or missing segments on

printed check patterns after doing Cleaning
(Light).

D

Select the cleaning method you want to use for
each row of nozzles.

All Nozzles

Choose this option if all patterns in the printed
nozzle check results contain faint or missing
segments. After making your selections, proceed
to Step 6.

Selected Nozzles

Select this if there are faint or missing segments
in only some of the numbered patterns (nozzle
arrays) in the check pattern. You can select
multiple nozzle arrays.

E

Choose the nozzle arrays to be cleaned.

(1) Use the 

d

/

u

 buttons to choose the nozzle

arrays with faint or missing segments in the
pattern, and then press the 

Z

 button.

(2) After selecting the arrays you want to clean,

select Execute With Selection, and then press
the 

Z

 button.

F

Head cleaning starts.

A confirmation message is displayed when
cleaning is complete.

If you paused the printer in Step 1, printing will
resume when head cleaning is complete; check
the printout to confirm whether the problem has
been resolved.

G

To print a check pattern and check the status of
the clog, use the 

d

/

u

 buttons to select 

Nozzle

Check

, and then press the 

Z

 button.

When printing a check pattern in the margin of
media on which a check pattern has already been
printed, press the 

u

 button to move the print

start position to the pressure rollers position.

When you select 

Exit

 and press the 

Z

 menu, the

setup menu closes.

Nozzles are still clogged after performing head
cleaning several times

The areas around the print heads may be soiled.

Perform the following.

(1) Perform 

Auto Head Maintenance

 from the setup

menu.

U

 

“The Maintenance Menu” on page 104

If clogging is not cleared after performing (1),
perform (2).

(2) Perform regular cleaning.

U

 

“Performing Regular Cleaning” on page 60

SC-F9300 Series     User's Guide

Maintenance

 

82

Summary of Contents for SureColor SC-F9330 Series


















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands