
205
Removing and Installing Ink Cartridges
Selecting Basic Print Settings - Windows
Selecting Basic Print Settings - Mac
Creating Paper Configurations
Cleaning Your Product
Lines Are Misaligned
If you see vertical lines in the print output when you use bi-directional printing. If this occurs, align the
print head.
Parent topic:
Solving Print Quality Problems
Related concepts
Print Head Alignment
Print Head Alignment
Prints are Scuffed or Smeared
If your prints are scuffed or smeared, try these solutions:
• Make sure your paper meets the specifications for your product.
• Do not use paper with folds or creases and always use new paper.
• If you are using cut sheet paper, check that changes in humidity and temperature have not made the
paper wavy. Flatten the paper before loading it or use new paper.
• If the surface of the paper is scuffed, select a wider
Platen Gap
setting. If the paper is still scuffed, set
Use Paper Eject Roller
setting to
On
.
Note:
Do not enable the
Use Paper Eject Roller
setting when printing on glossy media.
• If an edge of the print is scuffed, try widening the corresponding margin.
• If ink is smeared on your prints, clean the rollers. Load blank paper and press the
cut/feed
media button to feed it through the printer.
• If you are using non-Epson media, make sure you created a custom paper configuration for the media.
• Make sure the
Paper Size Check
setting is set to
On
, or the printer may print outside the edges of the
loaded paper and smear ink on the back of the print.
• If the
Auto Cut
setting is set to
Off
, try setting the
Margin Per Page
setting to
65mm
.
Summary of Contents for SureColor P10000
