Basic Operations
70
Multi-Strike Printing
Choose the number of times each line is printed.
1. Use the
d
/
u
buttons to select
Multi-Strike Printing
and press the
Z
button.
2. Use the
d
/
u
buttons to choose a value.
3. Select the desired option and press the
Z
button.
4. Press the
y
button to return to the customize settings menu.
Roll Type
Choose
Printable Side Out
or
Printable Side In
according to how the media is rolled.
1. Use the
d
/
u
buttons to select
Roll Type
and press the
Z
button.
2. Use the
d
/
u
buttons to select the desired setting and press the
Z
button.
3. Select the desired option and press the
Z
button.
Tension Measurement
Periodically
is recommended in most circumstances. Choose
Off
if slack develops in the
media or other printing problems occur.
1. Use the
d
/
u
buttons to select
Tension Measurement
and press the
Z
button.
2. Use the
d
/
u
buttons to select the desired setting and press the
Z
button.
3. Select the desired option and press the
Z
button.
Media Tension
Increase tension if creases appear in the media during printing. The higher the value, the
greater the tension.
If you have previously performed Feed Adjustment, you will need to perform it again after
adjusting Media Tension.
See “Feed Adjustment (manual)” on page 68.
1. Use the
d
/
u
buttons to select
Media Tension
and press the
Z
button.
2. Use the
d
/
u
buttons to choose a value.