Epson SureColor F6370 User Manual Download Page 20 | Manualshive

Page: 20 / 135

background image

20

• Dry printed media completely before folding or stacking it, or the printed surface may be damaged.

• Keep printed media out of direct sunlight.

• Display and store printed media as instructed in the media documentation.

• When you are not printing on media, remove it from the printer and place it in its original packaging to

prevent deterioration.

Parent topic:

Printer Usage Guidelines

Storing Your Printer

Follow these guidelines if you need to store your printer for a long period:

• If the printer is not used for an extended period of time with the power off, clean the print head nozzles.

Turn the printer on at least once every two weeks to automatically clean the print head and prevent the
nozzles from clogging. If you do not turn on the printer for a long time, the printer may malfunction.

• If you will not use the printer for a prolonged period of time, maintenance must be performed by a

service engineer before and after this period. Contact Epson support.

• Even if the printer is not turned on, ink that has accumulated in the waste ink tube may leak out. Make

sure the waste ink bottle is installed even when the printer is not on.

• Remove any loaded media before storing the printer to prevent the pressure rollers from causing

creases in the media, which may cause jams or damage to the print head.

• Make sure that the print head is in the home position before storing the printer. If it is left away from the

home position for a long time, the print quality may decline.

• Close all the covers on the printer to prevent dust and debris from getting in. If the printer will be not be

used for an extended period of time, protect it with an anti-static cloth or other cover. The print head
nozzles can become clogged if fine dust gets on the print head, and you may not be able to print
properly.

• Store the printer on a level surface; do not store it on angle, on its end, or upside down.

Parent topic:

Printer Usage Guidelines

Related references

Where to Get Help

Related tasks

Cutting Media
Cleaning the Print Head

«
...
18
19
20
21
22
...
»

Summary of Contents for SureColor F6370








































































































































Reviews:

No comments

Related manuals for SureColor F6370

Brand: Oki Pages: 2

Brand: Oki Pages: 52

Brand: Oki Pages: 117

Brand: Oki Pages: 45

Brand: Oki Pages: 112

Brand: Oki Pages: 115

Brand: Oki Pages: 2

VarioPrint 6000 MICR series

Brand: Oce Pages: 264

Brand: Oce Pages: 194

imageRUNNER 5075

Brand: Canon Pages: 250

Brand: Oki Pages: 126

MAGICARD 300plus

Brand: Ultra electronics Pages: 45

Brand: Olivetti Pages: 82

da Vinci Jr. 1.0

Brand: XYZ Printing Pages: 3

Brand: Citizen Pages: 57

Brand: Lanier Pages: 118

IM C6000 Series

Brand: Ricoh Pages: 2

Brand: VASTEX Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands