Epson SureColor F2100 Series, User Manual

Page: 155 / 204

155
Printer Setup Menu Settings
Settings on the Printer Setup menu let you run print quality adjustment utilities.
Caution: Follow the instructions in the topic links below the table to use these menu settings correctly.
Setting Options Description
Head Alignment — Select to run the head alignment utility
to correct grainy or blurry print results
by realigning the print head for each
platen size; this alignment does not
affect your print results if you selected
Uni-Directional as the Head Move
Direction setting on the USB File List
menu
Offset Head Alignment –10 to +10 Use this setting when you change the
platen height but do not want to
perform Head Alignment. One stop
down on the platen (3 to 4 for example)
is equivalent to a +3 setting. You can
also use this setting to fine-tune
alignments when a spacer pad is used
to raise the flat surface of the garment.
Feed Adjustment –1.00% to +1.00% Select to adjust the platen feed each
time the print head moves; select a
higher number if dark lines appear or a
smaller number if faint lines appear
Parent topic: Using the Control Panel Menus
Related tasks
Aligning the Print Head
Cleaning the Print Head
Adjusting the Height of the Platen
USB File List Menu Settings
Settings on the USB File List menu let you print, delete, and control settings for files on a USB memory
device connected to the printer.