Epson SureColor F2100 Series, User Manual

Page: 100 / 204

100
Adjusting the Height of the Platen
Using the Ink Cleaning Solution
When cleaning around the suction cap, the encoder strip (carriage scale), or the print head, use the ink
cleaning solution. Use the ink cleaning solution only to clean the suction cap and encoder strip (carriage
scale), and around the print head.
Caution: Always wear gloves when using ink cleaning solution, and follow these safety instructions:
• If cleaning solution gets on to your skin, immediately wash it off using soap and water. Consult a
physician if the skin appears irritated or discolored.
• If cleaning solution gets in your eyes, rinse immediately with water. Failure to observe this precaution
could result in bloodshot eyes or mild inflammation. If problems persist, consult a physician.
• If cleaning solution gets in your mouth, consult a physician immediately.
• If cleaning solution is swallowed, do not induce vomiting and consult a physician immediately. If
vomiting is induced, fluid may get caught in the trachea which can be dangerous.
• If you notice that the cleaning solution has changed color or emits a bad odor, stop using it and open a
new maintenance kit.
• Close the cleaning solution lid securely after use, and store it out of reach of children. Avoid storing it
in locations subject to high temperatures, high humidity, and direct sunlight.
• Wash your hands thoroughly after using the cleaning solution.
1. Remove the lid and the airtight seal from the ink cleaning solution bottle.