Epson Stylus Pro XL Setup And Software Manual Download Page 44

Page: 44 / 52

Selecting Paper Size and Orientation Using Page Setup

By default, the printer expects letter-size (8.5 x 11 inches)

paper. To select a different paper size, choose

Page Setup

the File menu of your application program. You see a dialog

box similar to the following:

You can select one of the following predefined paper sizes:

A4 (210 x 297 mm)

A4 (Landscape)*

A4 (Centered)

A3 (297 x 420 mm)

Super

(13 x 19 inches)**

US B (11 x 17 inches**

Letter (8% x 11 inches)

Letter (Landscape)

Letter (Centered)

Legal

x 14 inches)

Legal (Centered)

Executive

x 10 inches)

Envelope

(4% x 9% inches) Envelope DL (110 x 220 mm)

Statement

x 8% inches)

Stylus Pro XL only; for Stylus Pro, use your software to select landscape

orientation.

Stylus Pro XL only.

Use one of the Centered paper sizes only if you have problems

centering the image on the page and your software program

does not have a setting that lets you do this. Centered images

have a slightly smaller printable area.

2-14

Installing and Using the Printer Driver

Summary of Contents for Stylus Pro XL





















































Search results

Summary of Contents for Stylus Pro XL

Reviews:

Related manuals for Stylus Pro XL

Brands by name

Popular brands

Epson Stylus Pro XL, Setup And Software Manual

Search results

Summary of Contents for Stylus Pro XL

Reviews:

Related manuals for Stylus Pro XL

Brands by name

Popular brands