Epson Stylus Pro GS6000, Setup And Use Manual

Page: 120 / 128

120
120 | Printer Parts and Controls Summary
Using Maintenance Mode
Maintenance mode allows you to customize the control panel language,
change units of measurement and temperature, and return all of the printer’s
control panel settings to their default values
1. Make sure the printer is turned off.
2. Press and hold the Pause button, then press the
P
Power button and
hold it until the printer turns on and the LCD displays
MAINTENANCE MODE.
3. Select the following settings as necessary:
4. Press the
P
Power button to turn off the printer.
5. Press the
P
Power button again to turn on the printer in normal mode.
CARRIAGE MOVEMENT
DATA WIDTH Sets the print head to move only to the width of
the print data to improve print speed.
PRINTER FULL WIDTH Sets the print head to move the maximum width
at all times to improve print consistency for certain
types of images.
PRINT MULTIPLE LAYER
OFF Sets printing to overwrite lines a select number of
times for greater density (also called “multiple
hit”).
2 to 8
Option and parameters Description
Setting Description
LANGUAGE Select the language displayed by the control
panel.
LENGTH UNIT Select METRIC or FEET/INCH units of
measurement displayed by the control panel.
THERMOMETER
UNIT Select °C or °F units of temperature displayed by
the control panel.
DEFAULT PANEL Returns all control panel settings to their default
values.