Epson Stylus Pro 9700 Series User Manual Download Page 52

Page: 52 / 228

Setting Up the Printer

5. Click the

Install

button.

6. Read the license agreement and click

7. Follow the instructions to install all necessary software and manuals,

8. When you’re done, click

Exit

and eject the CD. Restart your computer

if prompted.

9. After your Macintosh restarts, do one of the following:

Note:

If you see a

message that the installer
has detected an older
version of EpsonNet
Config on your system,
you must uninstall the
older version before you
can install the new one.
Open the

Applications

folder and drag the

EpsonNet

folder into the

trash. Then reinstall your
printer software.

Summary of Contents for Stylus Pro 9700 Series





































































































































































































































Search results

Summary of Contents for Stylus Pro 9700 Series

Reviews:

Brands by name

Popular brands

Epson Stylus Pro 9700 Series, User Manual

Search results

Summary of Contents for Stylus Pro 9700 Series

Reviews:

Brands by name

Popular brands